SeeStar S50 2 inch Filter Holder by Mike Crapo

Mike Crapo

Hobby & DIY>Other Hobby & DIY

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 3 walls, 100% infill

Designer

28 min

1 plate

4.7(3)

0.08mm layer, 3 walls, 15% infill

Designer

25 min

1 plate

4.0(1)

Open in Bambu Studio

Boost

322

105

Released

Description

2 inch filter holder for the ZWO SeeStar machine. This has a friction fit into the machine, and a threaded fit for the 2 inch filter. Allows you to use whatever 2 inch filter you want on your SeeStar machine.

Recommend printing in .08 layer height as the threads are very fine and need a small layer height to print properly.

Note: There are two profiles in this print. One has the Filter Holder using tabs for the friction fit, the other is a full circle of material being used for the friction fit.

Warning: Turn off out auto shutoff while using this, and do not shut down or park the head while this is in your machine. There is mot enough clearance to park the head while this it inserted in the machine. Use at own risk.

zwo

seestar

filter holder

Comment & Rating (6)

@user_492075572

Print Profile

0.08mm layer, 3 walls, 100% infill

so this did not work for the application, the treads were different pitch. I’m new to this so I have no idea how to change that right now. the file printed pretty good but the treads were a bit wonky could be user error. printer quite fast.

The designer has replied

@MikeCrapo

I am not sure what 2” filter you tried. The Optolong filter I have, had high pitched, and is what I used to determine what was needed. Tell me the filter you tried,

@user_492075572

Replying to @MikeCrapo :

I don’t currently have the filter it was a project for my cousin.