Hueforge of the cover art of Final Fantasy 7 original.

Comes in two plates.

Plate 1 : arms and head are on top

Plate 2 : background is on top

Pick your favorite :)

Plate1:

Project: ff78.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 100x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.2mm and the Actual Depth is 1.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Green Transmission Distance: 2
PLA PolyLite Green Transmission Distance: 1
PLA PolyLite Stone Blue Transmission Distance: 0.1
PLA BambuLab Matte Ice Blue Transmission Distance: 1.9
PLA BambuLab Matte Ivory White Transmission Distance: 3.4
PLA BambuLab Basic Orange Transmission Distance: 5.4
PLA BambuLab Matte Lemon Yellow Transmission Distance: 3.1
This print uses 8 unique filaments

Swap Instructions:
Start with Charcoal
At layer #10 (0.52mm) swap to Green
At layer #12 (0.6mm) swap to Green
At layer #13 (0.64mm) swap to Stone Blue
At layer #14 (0.68mm) swap to Ice Blue
At layer #15 (0.72mm) swap to Ivory White
At layer #19 (0.88mm) swap to Charcoal
At layer #20 (0.92mm) swap to Orange
At layer #24 (1.08mm) swap to Lemon Yellow
At layer #25 (1.12mm) swap to Ivory White for the rest.

Plate2:

Project: ff78_InvertTD3.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 100x150mm in size
You may print at higher layer heights below the Min Depth of 0.2mm
The Max Depth is 1.4mm and the Actual Depth is 1.4mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Orange Transmission Distance: 5.4
PLA BambuLab Matte Lemon Yellow Transmission Distance: 3.1
PLA BambuLab Matte Ivory White Transmission Distance: 3.4
PLA BambuLab Basic Green Transmission Distance: 2
PLA PolyLite Green Transmission Distance: 1
PLA PolyLite Stone Blue Transmission Distance: 0.1
PLA BambuLab Matte Ice Blue Transmission Distance: 1.6
This print uses 8 unique filaments

Swap Instructions:
Start with Charcoal
At layer #6 (0.36mm) swap to Orange
At layer #13 (0.64mm) swap to Lemon Yellow
At layer #15 (0.72mm) swap to Ivory White
At layer #18 (0.84mm) swap to Charcoal
At layer #24 (1.08mm) swap to Green
At layer #26 (1.16mm) swap to Green
At layer #27 (1.2mm) swap to Stone Blue
At layer #29 (1.28mm) swap to Ice Blue
At layer #31 (1.36mm) swap to Ivory White for the rest.

Happy printing !