Bambu Studio Settings:
The settings are just a recommendation, however you can print with the settings you are already used to using!

Suggestions for before and after printing:

• Opt for a textured PEI sheet

• To create an opening for the LED USB cable, you have several options: use a soldering iron, drill a hole, or add a negative template to the slicer where you want the opening

• To increase the brightness of the parts, I suggest you apply aluminum tape to the inside of the back cover

• Make sure you clean your work surface well

List of materials and tools needed to assemble the parts:

• Aluminum tape for the back cover • A hot glue gun to fix the LEDs in the designated space to prevent them from coming loose

• A soldering iron to create the opening for the USB cable and/or to solder the LEDs to the USB cable with an ON/OFF switch

• White or RGB LEDs

•https://pt.aliexpress.com/item/1005005268284797.html?spm=a2g0o.detail.0.0.2b8917c4tPhFxI&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40000.327270.0&scm_id=1007.40000.327270.0&scm-url=1007.40000.327270.0&pvid=df42ec43-9a25-45b7-8e8f-f8c9b8169e7e&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40000.327270.0,pvid:df42ec43-9a25-45b7-8e8f-f8c9b8169e7e,tpp_buckets:668%232846%238115%232000&pdp_npi=4%40dis%21EUR%216.46%212.15%21%21%2149.52%2116.43%21%402101e7f617046471467568911e768b%2112000032430610955%21rec%21PT%212764448397%21

•https://pt.aliexpress.com/item/1005005197418171.html?spm=a2g0o.order_list.order_list_main.53.4164caa4Xnz2fM&gatewayAdapt=glo2bra