DrTrollo

0.16mm layer, 3 walls, 100% infill

mtaphorn

Bre3Dlove Designs

The water output is a little high, but it's good to use.

sago35

RockyF

Marius o

There is a leak between the print and the bottle

diego.cattel

AKXYZ

zackza

Langa__

RestoreDoctor

cover

20240122_142338_fc0f6ffd-3298-4ba7-a787-a8a7f718a190.webp

plate_1.png

0.4 nozzle0.16mm Optimal layer height produced a very smooth and sturdy print for me.Print with normal(auto) supports so they hold up the inside of the nozzle (above the threads) and the corner that is under the small spout during printing. Normal supports were easy to remove. Do not use tree supports or they will get in the threads and require a lot of manual removal skills.&nbsp;&nbsp;

Small cap should be printed in TPU and scale up to 99%Settings:<ul><li>0.16mm Standard +custom settings:</li><li>Wall loops min. 3</li><li>Infill 100 %</li></ul>

PET bottle - watering cap

Global

Print Profile(1)

Description

Comment & Rating (21)

License

Related Models

Wasp Trap PET Bottle | Anti Wasp

Whirlpool Bottle Cap

push opener (bottle opener)

Poolsprinkler / Water Jet Pool