BL AMS Air Max 3 Add-on Cover & Lid V2 by S.ID

S.ID

3D Printer>3D Printer Accessories

Print Profile(2)

All

X1E

P1S

P1P

X1 Carbon

0.16mm layer, 2 walls, 15% infill

Designer

3.1 h

1 plate

0.2mm layer, 2 walls, 15% infill

16 min

1 plate

3.7(3)

Open in Bambu Studio

Boost

102

Released

Description

BL AMS Air Max 3 Add-on Cover & Lid V2

This is an add-on piece for the Air Max 3 to close up the lid fully. It is not a have-to-have but a good-to-have if you like to complete the enclosure and have some peace of mind.

To best secure the cover onto the lid, a new indentation feature was added to the lid. This new feature helps the cover sit still even if you hold the Air Max 3 upside down and fully loaded.

However, if you choose not to reprint the lid V2 and use the original lid, this new add-on cover will still be able to fit on the original lid, but you will miss out on the locking function.

Enjoy !!!

!!! Available Air Max Series !!!

Air Max 1

https://makerworld.com/en/models/176212#profileId-395076

Air Max 2

The whole line of Air Max 2 can be found on Printables!

https://www.printables.com/model/889648-bambu-lab-ams-desiccant-container-_air-max-2

You can find Air Max 2 Corner Box here:

https://makerworld.com/en/models/479003#profileId-392826

Air Max 3

The original file is available here:

https://makerworld.com/en/models/492462#profileId-406698

With your support, I will be able to invest more time in many lined-up projects that boost satisfaction with 3D printing and hopefully many things else later.

Cheers!!!

Upcoming!

Air Max 4

Comment & Rating (23)

@user_3836330601

Print Profile

0.2mm layer, 2 walls, 15% infill

What more can I say! You are one of the best! Thank you again for this upgrade!!!

@WSIDCollective

I like the surface quality of your print. Looks really nice. Have you dial down the layering height?

@user_3836330601

Replying to @WSIDCollective :

Nope, I just use the default setting from my X1-C (0.2mm)

@nightshademods

Replying to @user_3836330601 :

What Filament?

@Technikfussel

I think there is something wrong

The designer has replied

@WSIDCollective

It looks like the print profile that Fire Time uploaded is missing the support material, which is why the printer is printing in the air at the overhang of the body. I update a print profile including the addon cover and the Lid V2. If you still can't locate the print files, please try to download the STL file directly. Cheers, S.ID

(Edited)

@Wishforit

printed out No problem, fit perfect.

@Djarvah

The print profile is no longer public

(Edited)

Other Issues:miss the second print. first one is not so great quality wise third strike

The designer has replied

@WSIDCollective

I update a print profile including the addon cover and the Lid V2. The print file I original uploaded was dedicate to the ASA material and I assume that is why you have so much stringing and things does not glue down, due to the higher heat need for the ASA than the PETG or PLA , which over heated PETG and PLA is hard to glue down and could overflow in extruding the material. Hope this helps and sorry for the missing notification on that. This new uploaded print file is based on PETG which should work on PLA too. You can also change the material in the Bambu studio to the proper material you plan to print with. Cheers, S.ID

@Djarvah

Replying to @WSIDCollective :

will give an other try in the future. thanks for you feedback

@Technikfussel

Print Profile

0.2mm layer, 2 walls, 15% infill

Support Issue:There is something wrong with the print profile

@WSIDCollective

(Edited)

@Mekks082

Where can I find the new lid v2 that will let these clip in?

The designer has replied

@WSIDCollective

I just update a print profile that include both addon cover and the Lid V2. If you still cant locate the Lid V2 , please try to download the STL file directly. Cheers, S.ID

@Mekks082

Replying to @WSIDCollective :

Awesome, thank you! Re-printing them in ASA right now.

@user_1058750385

Tried to print 2 of these twice but all 4 failed to print and I had to stop the job. On all 4 prints the model pulled away from the supports at one end once it started printing the wide section. Not had any issues printing your other stuff so not sue what the issue is this time.

The designer has replied

@WSIDCollective

I think the print file I released before is with the material of ASA. And that is a material that required higher heat at the hot end. I will upload one with either PETG or PLA print file later. Hope this helps..

@user_1189169801

I printed 6 of another version because you didn’t have hole cover. But I will be printing your version as soon as my printer is free. I love your design over all the others I’ve seen.

The designer has replied

@WSIDCollective

Much appreciated for your kind words and support which keeps me going!! Cheers, S.ID

@user_2494704950

The print profile is no longer public

print of the hole cover went well but had a little difficulty fitting to original lid. maybe I should print the new lid as well :)

@user_2510864364

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Can lid for aluminum cans

auToeXeCc

Bambu Lab AMS Desiccant Tray _Air Max 3

S.ID

329

701

GIF

60° V2 Engine Fidget Toy

Raven3D

P1S LED Air Vent Glass Riser V2

ENVY3D

102