Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 225x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA Sunlu Dark Gray Transmission Distance: 2.5
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Gray
At layer #17 (1.44mm) swap to Silver
At layer #22 (1.84mm) swap to Jade White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.