as always i included the STEP and f3d files so you can customize the back with your own logo.
this is a battery/power bank add-on for your Pico 4 Head Strap.

This add-on is compatible with the INIU Power Bank, 22.5W Fast Charging 10000mAh, as well as the Pilot X7 20000mAh Power Bank (old and new models). It can be printed in 0.16mm resolution with 60mm/s speed, without the need for supports (the Pilot X7 variants, come with snap off supports).

To ensure better layer adhesion while printing, I've added stabilizers to the HeadRest, and recommend using a brim. With the INIU Power Bank's fast charging, you can charge your Pico 4 faster than it can be used. i recommend purchasing two INIU Power Banks to easily switch them out and charge the empty one while the other is in use.

Please note that if you purchase the Pilot X7 now, you'll need to print the "New model" version. If you bought the Pilot X7 a long time ago, it may be the old version, so be sure to measure it before printing.

(DE) INIU Power Bank: https://www.amazon.de/dp/B08VD632WJ
(US) INIU Power Bank: https://www.amazon.com/dp/B08VD632WJ
(DE)Pilot X7: https://www.amazon.de/dp/B09B78SPJH

To make printing easier, I've split the add-on into two parts: the Headrest and the Powerbank holder. Simply glue them together for a secure fit.

If you encounter any issues, please feel free to contact me on Discord: StriK3FoRC3#0001 Additionally, you can join my Discord Server for more support.

Donate if you want, need more Filament for other Projects/Prototypes ;)