I tried multiple Pilldispenser shared here, but I wasn't really happy with any of them. Some were too bulky, others too fragile, others had no space, etc…

So I designed my own and built it completely from scratch in Fusion.

The top plate is available in English and German and in a 2 week version and 1 week version.

The 2 week version has one for day, night and general.

The first version had only 15 fields like (https://www.printables.com/model/864751-one-click-weekly-pill-dispenser-v20), which led to the problem that the lid was not locked when the dispenser was refilled, which is why there is a "Full" field.
So after you reached the “Empty” field, and you have refilled the compartments, you can spin it to “Full” and the lid is locked again.

Also added a higher version (only base, spring and wheel) if someone needs bigger compartments.

If someone wants to use the same colors i used, i added the 3mf files.

Which parts are needed and how do you assemble them:

• 1x Base
• 1x Wheel
• 1x Spring
• 1x Plate bottom
• 1x Plate top

After you finished the print, you have to put the wheel into the base.
The spring comes into the one compartment with the wall on the outerside (and the flat bottom)

You have to glue the bottom and the top plate together (for me it was easier to print).
The one field on the bottom plate, which looks different is the “Empty” compartment and must be aligned with this