100mm lithophane depicting fireworks over New York City mounted on a lighted base. The lithophane is printed in white and then painted with water colors. I'm no artist. I used a cheap kid's set of water colors and just tinted the painted areas. You don't need much color to make it pop. The lighted base is included in a separate profile.
Check out my other spherical lithophanes
Purchased Parts
I used these USB Light Sticks
Any USB extender cables will work.
Printing Instructions
My profile has all my preferred settings. If you prefer to plate your own (stl's in the raw files section), I suggest the following settings:
Make Your Own Lithophanes Using My Light Base
You can generate your own lithophanes using your own photos at Lithophanemaker.com. The lithophane can be set for any diameter as long as the base is the correct size to fit in the lighted base.
I used the following settings:
Lithophane Resolution: 0.25
Sphere Diameter: 100
Picture Angular Height: 110
Picture Angular Width: 164.36
Maximum Thickness: 3.5
Minimum Thickness: .42
Cylinder Outer Diameter: 40
Cylinder Height: 10
Cylinder Thickness: 5
Cylinder Ledge Outer Diameter: 50 (make sure this is set to 50mm to fit into the light base)
Top Hole Outer Diameter: 0