Simple PETG Stringing Test / Calibration
Copyright Claim
Simple PETG Stringing Test / Calibration
Boost
7
22
28
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
36 min
1 plate
A1 Mini - 0.2mm layer, 2 walls, 15% infill
Designer
43 min
1 plate
Boost
7
22
28
0
242
246
Released
Description
Simple PETG stringing torture test to dial in your settings
Comment & Rating (28)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Damn I’m gonna miss my a1 :( no stringing at all basic Bambu petg dried 6 hours 55c
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Wonderful little model. Helped me tune my PETG settings so that I could reduce stringing. Seemed to do the trick!
0
Reply
how do you reduce stringing if I have some too?
0
Reply
Replying to @Rodger
I did some searching and tinkering. I found that reducing overall cooling and upping the temperature of the extruder did the best for me. I set max part cooling to 20%, first layer at 260C, other layers at 265C, and max volumetric speed to 10mm3/s.
Other than that, slowing down the print overall will help a lot I found. That, and drying your filament.
(Edited)2
Reply
Replying to @corey.coldren
thank you!! temp helped and I also added 0.4mm of additional retraction which seemed to make a difference as well
(Edited)2
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
danke 👍
0
Reply
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
Very easy to print and quick. Great visual to see retraction.
0
Reply
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
great model to test
0
Reply
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
👍
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Not sure what this is suposed to do because my print does stringing but this one dont with the same settings. So i'm not able to dial anything :(
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great test, 0 stringing
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Its OK
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld