Adapter to add an IKEA Skadis pegboard to the side of an Expedit cube shelf without drilling.

Adapter to mount Skadis pegboards to Expedit in horizontal and vertical orientations.

2x M4 nuts required.

Just print the files in the orientation, add a pause command at ~14.80mm (just before the nut hole is being printed over, may change if layer is not 0.2mm), insert the nuts into the part and resume the print.

Print profile for Bambu A1 mini included, pause should already be set at the required layer.

For other models printing with 0.20mm Strenght preset + changing infill to 30% Gyroid should do the trick.