Enjoy this HueForge model of David Rubinger's iconic photo of IDF paratroopers, Zion Karasenti, Yizhak Yifat, and Haim Oshri after Israel's victory in the Battle for Jerusalem on June 7, 1967. Jews had been barred from the Old City of Jerusalem when it was under Jordanian rule. Liberating our most holy site - the Western Wall ("Kotel") - brought these brave soldiers to tears, a moment captured on film and forever inscribed in the country's soul.

NOTE: The file “Paratroopers at the Western Wall_BAMBU PROFILE.3mf” includes all of the required filament swaps and print settings. I could not upload it as a standalone print profile because it has a lot of triangles and exceeds the MakerWorld slicing time limitations.

Printing Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

2 Wall Loops

Arachne Wall Generator

This print uses 6 unique filaments: 
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Tough Cream White Transmission Distance: 10 (You'll get similar results with BambuLab PLA Basic Gray)
PLA BambuLab Tough Gray Transmission Distance: 1.8
PLA PolyLite Dark Grey Transmission Distance: 0.1
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 4
 

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Cream White
At layer #8 (0.72mm) swap to Gray
At layer #12 (1.04mm) swap to Dark Grey
At layer #13 (1.12mm) swap to Cream White
At layer #15 (1.28mm) swap to Ash Gray
At layer #17 (1.44mm) swap to Cream White
At layer #20 (1.68mm) swap to Ivory White for the rest.