我有一台P1S，丝杠上的润滑油很容易蹭到手上。我找了一些丝杠保护罩，但是大多只适配X1系列打印机。有一些可以用在P1S上，但是多少有些问题。所以我设计了这个模型。

I have a P1S, and the lubricant on the lead screw can easily get on my arm. I found some lead screw shields, but most of them are only compatible with the X1 series printers. Some can be used on P1S, but there are still some problems. So I designed these shields to meet my requirements.

特点：

Features:

1.适配P1S。在我的P1S上工作得很好。我没有P1P。如果你把它用在P1P上，请留言告诉我是否适配。

1. Compatible with P1S. They work well on my P1S. I don't have a P1P. So if you use them on a P1P, please leave a comment to let me know whether they are compatable or not.

2.完全遮挡了丝杠的前面和侧面，确保不会蹭到润滑油。

2. The front and side of the lead screws are completely shielded to ensure that the lubricant will not get on your arms.

3.与打印平台有超过0.5mm的间隙，使用了半年，没有出现剐蹭。

3. There is a gap of more than 0.5mm with the printing platform. After putting them on for half a year, there is no scratch.

4.保护罩经过修型，不会遮挡摄像头。

4. The shields have chamfers at the top end and will not block the camera.

5.我使用4个8*3mm的磁铁。同时提供了没有挖孔的stl模型，你可以很方便地按需挖孔（比如使用windows自带的3DBuilder），来安装你喜欢的磁铁。

5. I use 4 8*3mm magnets. At the same time, STL models without holes are provided. You can easily make holes on demand (such as using 3DBuilder that comes with Windows) to install your favorite magnets.

6.我使用PETG打印保护罩，在255°/80°，封箱打印的环境下，使用了半年没有出现问题。

6. I used PETG to print the shields. In the printing environment of 255°/80°, with door closed, they have worked for half a year without any problems.

7.需要支撑，不过不难拆除。

7. Support is needed and will be easy to remove.

8.我同时设计了一个scoop，对保护罩下端进行限位。确保保护罩不会变形，从而影响到打印平台。你能在这里找到它：https://makerworld.com/zh/my/models/501791

8.I also designed a scoop, to limit the lower end of the shields. So that the shields will not move and affect the printing platform. You can find it here: https://makerworld.com/zh/my/models/501791

喜欢的话请给个赞。

如果有任何改进的建议，请随时留言。

Have fun with it and leave a like if you like it.

If there are any suggestions for improvement, feel free to write a comment.