Hi all,

This is the very first model that I've uploaded to MakerWorld. This simple, little chair, that measures about 48x60x35mm in size, is what got me started in 3D printing. As part of an assignment for a Uni course, all students had to design a chair using SolidWorks, as part of an introduction to the program and to rapid prototyping. This is the chair that I made, and that helped me get a very high grade due to its simple, modern design with complex parts such as the seat and backrest, but also due to its printability.

It can be printed on standard Bambulab settings with a 0.2mm layer height and if you're using a textured PEI plate there is no need for a brim. If you're printing with different build plates and/or printers I would recommend to use a brim for better adhesion.

I hope that you guys will appreciate this model as much as I do, and don't forget to give a thumbs up and leave your thoughts below!