Filament Swatch for Fiberlogy PLA Impact.
I came upon this filament in my search for a high temperature PLA that could be used with PCTG without causing extruder clogs. This one worked quite well. I only bought it in one color so the profiles are based on the Light Green color.
Click the down arrow next to the green Download or Print button. Click Download STL. | ![]() |
You'll be presented with two folders of files.
The Project files contain 3MF project files you can open and load your model into to print. You can optionally save the profile to your computer.
The Filament profiles contain files you can import into Bambu Studio or Orca Slicer. These will be available for you to select. | ![]() |
I'm including the profiles in two styles: Project files and filament profile files
Just download the project file, import your models, and print.
There are 3 versions of the file.
Download the filament profile and import into the slicer.
Follow the instructions above to download the profile files.
In the slicer, go to File > Import > Import Configs…. Select the filament profile file you downloaded. | ![]() |
You should see a message like this.
| ![]() |
If you select the Light Green or the Support filament profiles, you should see 2 configs imported. If you do not, go back and import the file again. When you do, you'll see a pop up similar to this. Just click Yes and continue. | ![]() |
The swatch model I used as the base is CC - Attribution - Non-Commercial - Share-alike.
My settings are free to use so long as you don't try to sell the settings for whatever reason.
-
Feedback letting me know how your print went would be greatly appreciated.
If you're feeling generous and like what you see, please give a boost. Alternatively, Buy Me a Coffee or just Send me a tip.