Ender 3 S1 Filament Swivel guide (supports Capricorn/PTFE tube 4mm OD) Remixed by ThreeDJourney

Remixed by

ThreeDJourney

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

4.7(3)

Boost

Released

Description

Don't forget to hit the like button if this helps you :)

A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug fit. Idea is the filament runs smoother through the PTFE tubing and depending on how long your tubing is can help eliminate sharp corners/bends on the filament.

Comment & Rating (7)

@Redbeard2

hey, any chance I could get the step file for this so that I can change it a little bit for my own use case?

The designer has replied

@ThreeDJourney

I remixed this with tinkercad ages ago so I don't have a step file sorry. If you follow the link to the original maker you may be able to get their step file if you ask.

@ashleychew

Print Profile

0.2mm layer, 2 walls, 15% infill

works great!

@Starlord80

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

The designer has replied

@ThreeDJourney

What size rail are you putting it on and have you checked the printed gap vs the rail size? If its sized correct there is almost no flex the print needs to fit. The little lip at the bottom holds the print to the rail.

@Starlord80

Replying to @ThreeDJourney :

using the standard rails on an Ender 3 v2. almost wants to clip on, then pop. broken. all good though. I went another route.