This is a small cool project that will allow you to create magical dice in which the desired result will come out.

By inserting magnets inside the dice, and in the base, it will be possible to turn the hourglass containing the dice and obtain always the desired result. Flipping the hourglass on non magnetic surfaces disables the trick, instead.

What you need are small magnets 6mm in diameter and 3mm in height, like these.

Two magnets must be inserted into each die on the face opposite to the one whose result you want to obtain.

The individual faces must be fixed to the core with a drop of glue.

Paying attention to the orientation of the magnets inserted in the dice, it is then necessary to fill the base with other magnets.

Once done, just seal the base with the lower cover, gluing it.

It is also possible to use an alternative base that can fit a ferrite magnet like the one below.

The dice container hourglass is easily assembled without the use of glue.

The dice are available in Retro and Arcade Styles.

If you like my work, please leave a like👍 to this design, or boost it 🚀!