Welcome to every true Slytherin!

Are you ambitious, shrewd, cunning, a strong leader and achievement-oriented? Are you a true Slytherin?!? Be yourself and show your affection with this wonderful pin! Make sure everyone knows what you are up to and who doesn't deserv to be part of the Triwizard Tournament! Tell everyone your opinion loudly: Potter Stinks!

Printing instructions:

• Print the Pin_Base with a regular 0.4mm Nozzle and 0.2mm Layer height. It roughly takes 10-15min.
• Print the Hueforge either with an AMS system or make sure to follow the instructions for manual Pause and Filament Change.
  • First Layer 0.16mm
  • General Layer Height 0.08mm
  • 100% Infill with Rectaliniar infill pattern
• Filament Change for Hueforge:
  • Start with Black (Overture Matte PLA in my case)
  • At Layer #7 (0.64mm) swap to  Bambu Lab Green
  • At Layer #14 (1.2mm) swap to white (Overture White PLA in my case)
• How to change manually Filament without AMS:
  • In your slice (Bambu Studio or Orca) go to the to layer you have to change the filament (#7 & #14)
  • Right-click the slider (or control+click on Mac) and use “add pause” (repeat it for every swap you need to make!)
  • When the printer arrives at the paused layer, go to the printer and choose Filament Change > Unload (or do it via the Slicer/App)
  • Remove the filament and replace it with the next one (green for #7 and white for #14)
  • On your printers display (or Slicer/App) load the new filament
  • After successfully loaded, resume the print

Assembly

After printing both models, the Button_Base and the Hueforge, glue them together and use a pin to attach it to your robe! Be careful not to hurt yourself!

If you need any further information regarding printing instructions for Hueforge or anything else, please let me know!!!