3D printing meets wood.

Hi friends, we are excited to present to you our new project.

We decided to combine the functionality of 3D printing with recycled wood to give it new life.

Our first project is this simple shelf, created through the use of recycled plywood panels and wooden rods.

For the project we used:
4 wooden rods with a diameter of approximately 22mm and 3 panels that we cut to the size we needed.

We have created 3 types of pins:
- one for the rods, which connect to the panels using screws,
- feet for the rods.
- Wall mount.

The prints of the 3d models that you can see on the shelf is created by us too.
Hope you like it!

As always we thank you for the support you give us, if you like our designs follow us and support us also on our social pages (Instagram and tiktok, X) Shack3d_print. We will be happy to see the result of your prints, share the photos with us by tagging us on our social pages, don't be shy. A thousand thanks.

Love, Marina from Shack3d_print.

3D PRINTING SETTINGS

FDM
3D PRINTED WITH BAMBULAB P1S
SLICER: BAMBUSTUDIO
Filament: pla matte from bambulab too
Temp: 220°C
Infill: 10%
Support: yes
layer height: 0.2
Nozzle: 0.4
Wall: 3
Top/Bottom: 3