Bauhaus Wall Art Frame

Copyright Claim

Bauhaus Wall Art Frame

Boost
16
29
1

Print Profile(5)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

01 - 5 colors - 0.2mm layer, 2 walls, 100% infill
01 - 5 colors - 0.2mm layer, 2 walls, 100% infill
Designer
1.1 h
1 plate

02 - 0.2mm layer, 2 walls, 100% infill
02 - 0.2mm layer, 2 walls, 100% infill
Designer
59 min
1 plate

03 - 0.2mm layer, 2 walls, 100% infill
03 - 0.2mm layer, 2 walls, 100% infill
Designer
56 min
1 plate
5.0(1)

01 - Single Color 0.2mm layer, 2 walls, 100% infill
01 - Single Color 0.2mm layer, 2 walls, 100% infill
Designer
59 min
1 plate
Click to see more

Boost
16
29
1
0
12
5
Released

Description

  • 🖼️ 🎨 Craft your own piece of art effortlessly; a minimalist design through bold shapes and a dynamic color palette.

Bauhaus Frame Set: A Tribute to Iconic Design

  • 📐 Geometric Harmony: Our Bauhaus Wall Art Frame Set features a series of geometric shapes and colors, inspired by the Bauhaus movement.
  • 👶 Easy to Print: No need for (AMS) or (MMU). Only two manual filament swaps are needed to complete the models.
  • 🔄 Snap Fit: Place your artwork into the front frame and snap the back frame on. When it’s time to switch art, just push from the front to release the back frame. Equipped with versatile hanging spots for vertical and horizontal showcases.
  • 🌈 Five-Color AMS Printing: For a five-color print, set Red as the fifth color in slot 1. After printing with White up to layer #7 (1.40 mm), and before starting with Red at layer #16 (3.20 mm), simply replace the White filament with Red. If you can’t monitor the printer, consider adding a pause between layers 7 and 16 to make the swap.

Technical Specifications for Posters:

  • 📏 Size:
    • 12x16 cm
  • 🔧 Print Settings:
    • Print at 100% infill with a layer height of 0.20mm.
  • 🌈 Color Changes: for Single Color Posters:
    • Start with Bone White
    • At layer #7 (1.40 mm), change to Black
    • At layer #10 (2.00 mm), change to Yellow, Blue or Red
  • 🌈 Color Changes: for the Multi Color Poster (separate file):
    • Start with Bone White
    • At layer #7 (1.40 mm), change to Black
    • At layer #10 (2.00 mm), change to Yellow
    • At layer #13 (2.60 mm), change to Blue
    • At layer #16 (3.20 mm), change to Red
  • 📋 Assembly and Usage Tips:
    • Alternatively, use our ready-to-print 3MF file—it automates these steps.
    • The files are available in STL, Prusa 3MF, and Bambu Lab 3MF file formats
    • Technical Specifications for Frame:
  • 📏 Size:
    • 12x16 cm
  • 🔧 Print Settings:
    • No supports needed. Optimal with a layer height of 0.20 mm and 15% infill for a balance of strength and material efficiency.
  • 📋 Assembly and Usage Tips:
    • The complete set includes the front and back frames, and three posters.

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
03 - 0.2mm layer, 2 walls, 100% infill
cool print, turned out good
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.