A simple 2 piece lamp that has a couple of different shades for personal taste and highlighting.

The shade with an opening in top can take a colored lid for mood. The pictures included show a yellow lid.

No supports required.

Assembly: (see pics)

1- Print the shade and the neck, print the lid if needed

2- Insert the puck led into the top of the neck, run the wires through the slot in the bottom

3- Insert the shade onto the neck

The puck led used here:

(The example used a 5W, 2700K, Warm White)

https://www.aliexpress.com/item/1005006425667037.html?

The shade and the neck in the images were printed using:

Sunlu PLA+ White

The slicer settings:

.20 mm Standard
Infill % - 15 , Grid

Wall loops: 6

Seam Position- Random

The Lid was printed using:

Bambu PLA Basic Yellow

.20 mm Standard
Infill % - 100 , Rect

Wall loops: 8

Bottom Shell layers: 8

Seam: Random