This will work for any bottle that has a opening of 28mm or more
This will work for any mug/cup/carafe with an outer diameter of 95mm or less
Can be used for any mug/cup/carafe or bottle that meets the above requirements.
labelled as “TYPE_MATERIAL_BUILD PLATE_TOLERANCE”
To prevent print profile clutter only the 0.2mm tolerances will be uploaded
Most printers will work with a 0.2mm tolerance, the parts may end up a little tight or a little loose between filaments.
If the part is too loose or too tight please use one of the other tolerances.
I have personally used this to dry out my water & sodastream bottles as well as my V60 carafe
Print in food safe PLA or PETG and place bottle on top to dry out.
UPDATE (2024-01-19)
UPDATE (2024-01-17)
UPDATE (2024-01-13)
UPDATE (2023-11-11)
UPDATE (2023-11-10)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.