Flipper Zero Case

Added alot to the model from the 3d case by shutdown on thing verse! I made the case avlible to be used with the inserts that came with the flipper zero. I also made it so there is many combinations so you can have the silicone case with the insert or no silicone case but have the Wi-Fi dev board top. Also made the SD card slot fit in more so the SD card does not rattle like a rattle snake and so the case can actually close. Also made the front holes big enough so they can fit common screws such as a m3 screw. 

Customization is through the roof with this case!

Default – Use the insets that came with your flipper zero so your Flipper Zero is protected with the foam and no more scratches!

Case with insets – 3d print the case with already made insets for the Wi-Fi Dev board and the Flipper Zero with silicone case on!

Custom – Mix the bottom and top with either insets or no insets tons of possibility's.

Color 

Color in the Flipper logo in Bambu Slicer at the top and remove the first bottom layer to get a flat and not grooved Flipper logo or color in the logo and get a grooved Flipper logo

How to assemble

Either you can use 2 M2 by 20mm for the back hinges and for the front m3 by 20 - 21mm

Or cut 4 nails that are 2mm diameter and cut them to  around 2.4mm length slide them in the back hinges and do the m3 by 20mm screws for front and done!

Coming Soon!

Flipper Zero Case with the Flipper Game Module for games on the go!