Project: MarioWatercolor.hfp

To successfully slice and print the HueForge model with Bambu Slicer, follow these steps:

General Print Settings:

1. Infill: 100%
2. Layer Height: 0.08mm
3. Base Layer Height: 0.16mm

Filaments Used:

PLA PolyTerra Charcoal Black

• Transmission Distance: 0.3

PLA PolyTerra Pastel Watermelon

• Transmission Distance: 1.5

PLA PolyLite Pro Light Blue

• Transmission Distance: 1

PLA Overture White

• Transmission Distance: 4.4

This print uses 4 unique filaments.

Swap Instructions:

1. Start with Charcoal Black
2. At layer #7 (0.64mm): Swap to Pastel Watermelon
3. At layer #10 (0.88mm): Swap to Light Blue
4. At layer #12 (1.04mm): Swap to White for the rest

Steps to Set Up Bambu Slicer:

1. Open Bambu Slicer and import the MarioWatercolor.hfp file.
2. Set the layer height and base layer height:
   • Go to the Print Settings tab.
   • Set the Layer Height to 0.08mm.
   • Set the Base Layer Height to 0.16mm.
3. Set the infill to 100%:
   • Under the Infill section, choose 100%.
4. Configure the color changes:
   • Go to the Objects or Layer Modifications section.
   • Set up color changes at specific layers:
     • Start with Charcoal Black.
     • At layer #7 (0.64mm): Add a color change to Pastel Watermelon.
     • At layer #10 (0.88mm): Add a color change to Light Blue.
     • At layer #12 (1.04mm): Add a color change to White for the remaining layers.
5. Load the specified filaments:
   • Assign the corresponding filaments to each color change based on the provided transmission distances.
6. Slice the model and review the preview to ensure the color changes are applied correctly.

For your convenience, screenshots of the settings can be found below the images. Additionally, a ready-to-use printer profile is available for download.

Have fun and enjoy your printing!