A1 Cable and Filament Guide by jayjojayson

jayjojayson

3D Printer>3D Printer Parts

Print Profile(2)

All

0.2mm layer, 3 walls, 9% infill - PETG

Designer

31 min

1 plate

2.0(1)

0.2mm layer, 3 walls, 8% infill - PETG

Designer

30 min

1 plate

Open in Bambu Studio

Boost

Released

Description

I don't use an AMS and therefore I needed a filament guide or cable guide.

The design is simple and can be plugged directly on top. No screws required.

I unscrewed the part with the guide from the original filament holder and screwed it onto the new holder. It works perfectly and you have a clean filament guide. You can also use the PTFE tube between the guide and the extruder again.

There is also a guide for the X-axis cable drawn. Simply plug in the cable and you're done. If you dont like it, you can use the 3mf or stl file without the cable guide included.

update 01.07.2024

improved version for cable guide. The cable has more room to move now.

Comment & Rating (10)

@BayKad

Print Profile

0.2mm layer, 3 walls, 9% infill - PETG

Other Issues:It didn't seem very productive.

The designer has replied

@jayjojayson

Why? I can use it very well.

@BayKad

Replying to @jayjojayson :

The problem is where the black power cord is held. In some cases it gets too tight.

@jayjojayson

Replying to @BayKad :

I haven't had any problems with the black cable so far. It took me a few tries to determine the position for the bracket. But I could move it down a few millimeters to create more space... will do it in the afternoon.