适配自定义宜家洞洞板的双面胶上墙连接件 / Customizable IKEA Skadis Wall Mount with Double-Sided Tape

适用于 参数化宜家洞洞板 可定制洞洞板的连接固定件，可用无痕双面胶上墙，适用于不想给墙开洞的朋友们（我自己）。

This connector is designed for the customizable skadis available on Parameterized IKEA SKADIS Pegboard. It can be mounted on the wall using double-sided tape, ideal for those who prefer not to drill holes in their walls.

非相关专业业余制图，有需求的可以自己改进。

This is an amateur design not related to any professional work. Feel free to improve it if needed.

如何生成 / How to Generate

现在可以使用自定义生成适配你的洞洞板和双面胶宽度的组件了，点击绿色自定义按钮调整参数即可。如果没有满意的参数选项可以直接打开代码进行编辑。

You can now customize the components to fit your skadis and the width of the double-sided tape. Click the green "Customize" button to adjust the parameters. If the available options are not satisfactory, you can directly edit the code.

注意：洞洞板厚度+洞洞板垫片厚度+本零件除去挖空的垫片高度 需要和你的螺丝一样长；连接固定部分高度不要超过洞洞板垫片高度。

Note: The combined thickness of the pegboard, the pegboard spacer, and the part (minus the spacer cutout) should match the length of your screws; the height of the connecting part should not exceed the height of the pegboard spacer.

安装方式 / Installation Method

将此部件当作墙壁用沉头M4和自己打印的洞洞板固定后，用双面胶固定在墙上。

Mount this part to the wall by first securing it to your 3D-printed  skadis using countersunk M4 screws. Then, use double-sided tape to attach it to the wall.

适配的自定义参数：8.6mm垫片高度，12mm垫片直径，关闭更少螺丝模式，其他默认，拼装后总厚度约20mm。

Recommended custom parameters: 8.6mm spacer height, 12mm spacer diameter, disable fewer screws mode, and leave other settings at default. The total thickness after assembly is approximately 20mm.

额外零件 / Additional Parts

M4x20 沉头螺丝若干 / Several M4x20 countersunk screws
M4 螺母 / M4 nuts