Attention Camry owners! Bring home the thrill of high-speed drifting with this 3D print model of your favorite car in action. Perfectly capturing the sleek design and dynamic movement of the Camry, this piece is a must-have for any true fan.

Printed result:

Original image:

Print Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x199.42mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal
At layer #12 (1.04mm) swap to Ash Gray
At layer #16 (1.36mm) swap to Ivory White for the rest.