Switch Unit Dummy for Airsoft
Just a dummy, no function at all.
As in e.g. Germany functioning laser or light attachments are prohibited to put on your (airsoft-)weapon, I made a dummy just for the looks.
Instructions:
The base (both parts) is printed in 30% infill PLA.
The holders are printed in 50% infill PLA. Both can obv. printed in PETG/ABS/ASA too.
The buttons are printed in TPU/TPE for the realistic haptic, the button points are optional and can be printed in whatever color PLA (i chose luminescent white)
The base consists of two parts. The buttons are put into the upper part (the button with two dots should face to the front, see my picture).
Then both is glued to the lower base part. Also the button points can be glued to the buttons (optional).
You also need:
Flexible string or real cable (2,8mm diameter as cable dummies).
2x M3*30 screws + nuts (for fastening the holders)
2x M4*6 screws + nuts (optional, just for the looks)
If you looking for a plug dummy, you will find one on my profile as well.
Let me know, if you got questions or ideas to improve :)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.