Universal Single Speaker Horizontal Phone Amplifier
Copyright Claim
Universal Single Speaker Horizontal Phone Amplifier
Boost
128
184
34
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.3 h
1 plate
Boost
128
184
34
3
670
208
Released
Description
I created this single speaker version of my stereo phone amplifier for anyone who's phone does not have a top stereo speaker. A benefit of this design is that it will fit almost any phone. It provides a great deal of sound amplification for all your music and movies. Enjoy!
Comment & Rating (34)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
The print profile worked well. probably looks better with a .4 nozzle over a .6.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
it's a good stand and an amplifier as well.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
cool print but not that functional, can barely hear a difference, but still cool. I added text and duck to it for my son.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
came out perfect and works great! Direct the sound great!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
it couldn’t fit my phone n it was standing it up straight, couldn’t hear good either.. maybe I’ll try again one day but sadly this print didn’t work for me
The designer has replied
0
Reply
I’m Confused by your statement. The phone isn’t supposed to stand up on this. It’s supposed to lay down on its side (like in the picture) so the speakers point into the amplifier. Are you sure you are using it properly? There’s no way your phone would not fit. Your phone is meant to rest on the groove. If you have a thick case, it doesn’t matter. It will still rest on its side on the groove and lean against the back. I don’t understand the issue you are having.
(Edited)0
Reply
What about supports on this model. I did the auto and it was filling the interior speaker part full of supports. Anyone able to give there experience with this model and supports. Thank You
The designer has replied
0
Reply
Supports are not required for this model at all. I designed it to have a slight slope on the inside of the speakers that helps it bridge the gap more easily without support. That’s why the included print profile does not have supports enabled. Hope this helps.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
adds volume works great
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
had some stringers in bridging
0
Reply
This would be cool with one of those MagSafe charging pucks
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
good print, works well
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld