My mother wanted me to make an angel print so here i'm made her one. Enjoy.

When you scale the model keep the Z at 100%, otherwise you are going to break it.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm

Swap Instructions:
Start with Black
At layer #6 (0.72mm) swap to Cement Gray
At layer #10 (1.04mm) swap to Grey
At layer #14 (1.36mm) swap to White for the rest.