这是V2版本，针对打印和校准时候的响声进行了优化。

响声来自两处，一处是支架与盒子之间的碰撞，另一处是竹屎与盒子之间的碰撞。

优化了结构使得支架与盒子之间压紧，没有晃动的间隙。

在盒子内侧增加了一层TPU，使竹屎与盒子之间不会发出响声，没有TPU也可以不打印。

可以很快捷地取下竹屎盒子

与桌面有5mm的间隙

组装后没有超出机器的侧边

对狭小空间很友好

This is the V2 version, optimized for noise during printing and calibration.
The sound comes from two sources, one is the collision between the bracket and the box, and the other is the collision between the poop and the box.
The structure has been optimized to ensure that there is no shaking gap between the bracket and the box.
A layer of TPU has been added on the inside of the box to prevent any noise from coming out between the poop and the box. Without TPU, printing can also be omitted.

Can quickly remove the poop box
There is a 5mm gap with the desktop
After assembly, it does not exceed the side of the machine
Very friendly to small spaces