This is my first attempt at using HueForge program to make this. I used the Bamboo Labs A1 with AMS light but you can still print this without a AMS but would simply need to manual color switches.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x117.55mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
- This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to 2nd color
At layer #13 (1.12mm) swap to 3rd color
At layer #20 (1.68mm) swap to 4th color