Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x179.89mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA+ IIID Max Orange Transmission Distance: 3.2

PLA+ IIID Max Yellow Transmission Distance: 5

PLA+ IIID Max White Transmission Distance: 5.6

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Orange

At layer #13 (1.12mm) swap to Yellow

At layer #19 (1.6mm) swap to White for the rest.