Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x179.89mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ IIID Max Orange Transmission Distance: 3.2
PLA+ IIID Max Yellow Transmission Distance: 5
PLA+ IIID Max White Transmission Distance: 5.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #13 (1.12mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.