Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 99.92x200mm in size
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Brown
At layer #14 (1.2mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Beige for the rest.