Over-Engineered Bambu Lab X1C Riser with Shutter Doors by user_3257010834

user_3257010834

3D Printer>3D Printer Accessories

Print Profile(0)

Add the first print profile to earn points

Boost

Released

Description

My printing suggestions:

Filament : ABS （When printing ABS, the room temperature can reach 50 degrees Celsius. Please try to choose materials that can withstand it.）

Layer Height: 0.2

Support : Yes

Support Style : Tree Slim

On build plate only : Yes

Remove small overhangs : No （Otherwise the top of the sliding door track will collapse）

Brim Type : Auto

*Please be careful when cleaning the door support, it is easy to tear.

The connector is not necessary. If you need it, you can download it here.

https://www.printables.com/model/560887-over-engineered-bambu-lab-x1c-riser-with-shutter-d

Comment & Rating (11)

@hans.j.pedersen

great print. for some reason they removed my comment? i printed it in abs with a brim, used it today and it works so much better than i thought👌 five star model

(Edited)

@coreymelton

Great print. Connectors are best printed slow, with tree supports and a 0.2 nozzle ... even then they are pretty difficult to get into the slots, but they are secure. Printed in burnt titanium and gold silk filaments

@javimon

I couldn't fit the glass on mine, don't know if it was due to shrinkage on my ASA or just dimensional discrepancy on my print, maybe the model tolerances are too tight.

@mjames

Same.

@Flotron84

Good morning, The printing went smoothly so far, but I increased the support structure in the area of the overhangs so that the groove for the sliding door had better layer adhesion. Unfortunately the file is missing the connectors, but they were quickly designed and printed.

(Edited)

The designer has replied