There is a negative shape in the print that allows for a hole on the top to put a tassle. It can be removed before slicing if you don't need it.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 110.25x441mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Lava Red
At layer #12 (1.04mm) swap to Sunrise Orange
At layer #15 (1.28mm) swap to Savannah Yellow
At layer #16 (1.36mm) swap to Arctic Teal for the rest.