Quick and easy print to organize items in your unfinished shed/garage/basement. The brackets are symetric and mount with #8 wood screws. You will need 3/8" diameter dowel that slot in the brackets and support the shelves. These can be found at any hardware store. The depth of the brackets and shelf is exactly 3.5" to fit perfectly flush within 2x4 framing.

Measure the distance between studs and adjust the y-direction scale of the shelves directly in the slicer accordingly. Make sure that uniform scale option is turned off. Do not adjust the X and Z direction scale as it will mess up the fit. The CAD was done at 100mm, so having a y scale of 200 will give 200mm wide shelves for example. You will most likely need two shelves side by side to cover the distance between two studs. By default, the scale is set to 200 (so 200mm wide) on the X1/P1 profile and 150 (so 150mm wide) on the A1 mini profile.

Let me know if you have any questions.