as i only had 608 ball bearings, i created my own peristaltic pump.
It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas.
- All the screws required are M3.
- The silicone hose should have an outer diameter of about 6mm.
- I use a standard nema 17 stepper motor with 42N/cm
- You can find the wiring and programming in various videos on youtube - I have not made any instructions myself due to the high redundancy
-----------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------
da ich nur 608 kugellager hatte, habe ich mir eine eigene peristaltik pumpe kreiert.
Sie soll zum Dosieren von Düngerlösungen im Hydroponik bereich verwendet werden, funktioniert aber sicher auch in anderen Bereichen.
- Alle benötigten Schrauben sind M3.
- Der Silikonschlauch sollte etwa 6mm Aussendurchmesser haben.
- ich verwende einen standard nema 17 Schrittmotor mit 42N/cm
- Die Verkabelung und Programmierung findet ihr in diversen videos auf youtube - ich habe wegen der hohen redundanz selbst keine anleitung dazu gemacht