Anatolian Shepherd dog head
Print Profile(1)
Description
Project: ASD.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 136x132.97mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA+ Sunlu Black Transmission Distance: 0.6
PLA PolyLite Natural Transmission Distance: 21
PLA+ Sunlu Burly Wood Transmission Distance: 2.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #11 (1.04mm) swap to Black
At layer #12 (1.12mm) swap to Natural
At layer #13 (1.2mm) swap to Burly Wood for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
