Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3.1mm and the Actual Depth is 3.2mm

Filaments Used:
PLA Microzey Black Transmission Distance: 0.3
PLA Microzey Red Transmission Distance: 4
PLA Microzey Orange Transmission Distance: 11
PLA Microzey Ivory Transmission Distance: 10
PLA Microzey Yellow Transmission Distance: 10
This print uses 5 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #6 (0.56mm) swap to Orange
At layer #12 (1.04mm) swap to Ivory
At layer #23 (1.92mm) swap to Yellow for the rest.