Project: YoruCSMPortrait

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x233.26mm in size

You may print at higher layer heights below the Min Depth of 0.24mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 2 unique filaments

Swap Instructions:

Start with Black

At layer #22 (1.84mm) swap to Jade White for the rest.

Also works with PLA+, if problems come up clean your plate and check your nozzle plus dry filament is very bad.