Abstract eye and mushrooms
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 150x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm
Filaments Used:
PLA Default White Transmission Distance: 5
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Brown Transmission Distance: 2
PLA+ Sunlu Green Transmission Distance: 10
PLA+ Esun Space Blue Transmission Distance: 3.5
PLA+ Esun Bone White Transmission Distance: 5
PLA Default White Transmission Distance: 5
PLA Hatchbox White Transmission Distance: 10
PLA+ Sunlu Yellow Transmission Distance: 10
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Esun Pink Transmission Distance: 5
PLA PolyLite Natural Transmission Distance: 21
PLA+ eSUN PERPUL Transmission Distance: 5
This print uses 13 unique filaments
Swap Instructions:
Start with White
At layer #3 (0.4mm) swap to Dark Blue
At layer #4 (0.48mm) swap to Brown
At layer #7 (0.72mm) swap to Green
At layer #9 (0.88mm) swap to Space Blue
At layer #10 (0.96mm) swap to Bone White
At layer #12 (1.12mm) swap to White
At layer #13 (1.2mm) swap to White
At layer #14 (1.28mm) swap to Yellow
At layer #16 (1.44mm) swap to Grey
At layer #18 (1.6mm) swap to Pink
At layer #19 (1.68mm) swap to Natural
At layer #22 (1.92mm) swap to PERPUL for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
