Project: Goku Color Aware.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 240x169.63mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.4mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.56mm) swap to Blue
At layer #14 (0.68mm) swap to Sky Blue
At layer #25 (1.12mm) swap to Jade White
At layer #26 (1.16mm) swap to Black
At layer #30 (1.32mm) swap to Red
At layer #33 (1.44mm) swap to Yellow
At layer #35 (1.52mm) swap to Orange
At layer #36 (1.56mm) swap to Jade White for the rest.