Print this display piece to show your excitement for the Olympics in Paris!

• Requires 2x M3 bolt (5 or 6mm will work, for longer bolts you can add spacers or cut them down)
• Glue is optional

Available Models:

• Seperate colored rings
• Monochrome rings (single piece)
• Either with or without bolt holes
• Stand with or without PARIS 2024

Ring assembly ''guide':

1. Attach the red ring to the green ring
2. Attach the black ring to the yellow ring
3. Place the black ring in the green ring
4. Place the blue ring in the yellow ring
5. Press a piece of filament in the slots. It is a tight fit by design, use for example a cutter to press the pieces of filament in the slots (see the last image)
6. Attach the rings to the base using two M3 bolts