Skyscraper Box
Print Profile(1)
Description
The original webpage for this post is on Printables. It was transferred here through the automated system, so some formatting, file links, etc. may not work as intended. Please see Printables for original post or see my full collection of designs on Cults3D. -Abby
Clever Skyscraper Box for City Storage
Original design for the 2024 Christmas Community Print Drive.
Both parts of the “Skyscraper Box” print without supports. Designed to fit my “Mailbox” model, it could certainly hold a few other small items. The base may be flipped to hold the rest of the building for added height, or use it as a separate adjunct structure.
More Models: Collection of all approved 2024 Christmas Community Print Drive models
Additional Information and Print Settings
The top piece is 59 x 59 x 150 mm. The base piece is approximately 68 x 68 x70. I printed with 0.25 mm layer height, 3 perimeters, 3 top and bottom layers, and 15% rectilinear infill. Note: Pay attention to the bridging on the base. Depending on your slicer, you may see better bridging at an angle of 45° (use slicer settings or rotate the object about the z-axis). No supports. No raft.
| If you are printing for the Community Print Drive, be sure to use the appropriate guidelines: 2024 Christmas Community Print Drive Printing Guidelines |
More of my designs on Cults3D: https://cults3d.com/en/users/abbymath
Not for commercial use. No derivatives. See license below.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)