Lumi Cute Ghost / Print in Place by La Calavera

La Calavera

Toys & Games>Characters

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

3.9 h

1 plate

5.0(4)

0.16mm layer, 2 walls, 5% infill

2 h

1 plate

4.2(6)

0.18mm layer, 2 walls, 5% infill

1.3 h

2 plates

[No AMS, 70%] 0.16mm layer, 2 walls, 5% infill, A1 mini

1.2 h

2 plates

Boost

205

297

478

193

Released

Description

Ready and Painted for Multicolor printers !!!

Print in Place no Supports Required

Lumi Cute Ghost / Print in Place // La Calavera licensed toy

Lumi Cute Ghost the name and distinctive likenesses are trademarks of La Calavera.

It works on Filament & Resin. / Can be scaled up

Don't add extra supports to the files, they are not needed and it will cause troubles.

This Design is protected by copyright Law. When you purchase, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial license to sell Physical Prints From The below link

Support Me: www.patreon.com/la_calavera_3dprint

Subscribing in Patreon and you'll get permission to use the Pictures and Music we share in your Social Media and Etsy Stores

Along with the STL files you'll find the 3MF files for multicolor, the toy is already painted and ready to be printed

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :

Instagram - https://www.instagram.com/la.calavera.3d.print/

3D PRINTING SETTINGS

Primary Layer Height = 0,1600 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2 / 3

Temperature= 215 C / 205 (it's up to you)

Default Printing Speed= 70,0 mm/s

Infill Percentage= 12% (or more, it's up to you)

Comment & Rating (17)

@TacticalKaoz

Boosted

Print Profile

0.16mm layer, 2 walls, 5% infill

printed in glow in the dark

@Marks1998

What brand did you use?

@TacticalKaoz

Boosted

Replying to @Marks1998 :

polymaker polylite pla

@teh_chaosjester

Print Profile

0.16mm layer, 2 walls, 15% infill

Great model, lil dude is pretty cute and helps with the wife approval to own 2 printers!

@loloboss83

Print Profile

0.16mm layer, 2 walls, 5% infill

nickel

@Brandonh527

Print Profile

0.16mm layer, 2 walls, 15% infill

nice print !

@STLDad6

Print Profile

0.16mm layer, 2 walls, 5% infill

love it

(Edited)

@heroatrandom

Print Profile

0.16mm layer, 2 walls, 5% infill

Other Issues:the print was 50% good and then went bad, it has bad layer adhesion with the overhang area on his belly. the eye holes are also different sizes so the printed eyes don't fit in there that well. This was printed with a supplied profile, I'm gonna make my own profile to get this to print better.

@ValeriaMomo

love It 😍

@fox1111520

Boosted

cute

@Dcap07

Boosted

Super cute

@Marks1998

love it !!!!! thanks for your creation!!!!!

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.