Project: Goku dark.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 135.83x239.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Dark Blue Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Dark Blue
At layer #8 (0.72mm) swap to Jade White
At layer #10 (0.88mm) swap to Black
At layer #14 (1.2mm) swap to Red
At layer #16 (1.36mm) swap to Orange
At layer #17 (1.44mm) swap to Jade White
At layer #21 (1.76mm) swap to Black
At layer #22 (1.84mm) swap to Cold White for the rest.