使其变成通用型 58MM粉碗 侧挂支架
Make it a universal 58MM powder bowl, side hanging bracket.
修改一些宽度数据 增加了一些宽容度 能适用更多型号的手柄
Modified some width data, increased some tolerance, can be applied to more models of handles.
修改了之前需要支撑才能打印的区域 变成可无需支撑打印 更加省料
Modified the area that needs to be supported before printing to be able to print without support, which saves more material
后挂区域进行了加厚 减小材料在高温情况下变形或者断裂的风险
Thickened the rear hanging area to reduce the risk of material deformation or breakage under high temperature.
减小了倒角的弧度
Reduced the curvature of the chamfer
具体细节可参考图片标注
Specific details can be found in the picture labeling
PS:我再打印时发现稍微有些底部翘曲问题,请适当提高底板温度(56°)防止翘曲。翘曲不影响使用。
PS: I found that the bottom warped a little when I printed again, please raise the temperature of the base plate (56 °) to prevent warping. Warping does not affect the use.