Print-In-Place Hinged Cone Filler - 1 1/4in Size by jamedeo

jamedeo

Tools>Medical Tools

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Classic Size - No Tabs - .2mm layer - 3 walls - 15% infill

Designer

1.5 h

1 plate

5.0(3)

Classic Size - With Tabs - .2mm layer - 2 walls - 15% infill

Designer

1.4 h

1 plate

ZigZag 70's cone filler

1.3 h

1 plate

A1 mini version

1.9 h

1 plate

Boost

Released

Description

This is a work in progress cone filler gadget designed to accept 1 1/4in size cone wrappers.

This print-in-place design has a hinged base to allow the device to open to remove the cone, or you could eject by inserting a tamper through the bottom passthrough hole.

The cap slides on to lock the base closed and act as a funnel.

Comment & Rating (8)

@ambientmic

Boosted

printed super nice, tolerances were literally perfect. This thing is designed like a tank, strong enough to pass down to at least 2 generations. Seeing how strong it is, I was surprised at how little filament it used. printed in anycubic glow blue PLA.

@shane68

Best cone filler I've used. Great design. Any chance there's going to be one for king size cones?

The designer has replied

@jamedeo

Thank you! King size is definitely in the works.

@shane68

Replying to @jamedeo :

can not wait. can't tell you how many different cone fillers I've wasted my time printing because they just don't work.. This one is fantastic. Had to cut my king size cones down to use it but it still worked flawlessly. I'll keep my eyes open for the King Size. Thanks for the contributions.

@candlejac

Great print, and the quality is amaing. Tolerances are tight and perfect. Adjusted it to fit the 70's style cone and uploaded that as well for others. Thanks for the print!